Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

自由返回轨道的P平面参数快速设计方法

针对自由返回轨道求解过程中地心轨道类型变化造成的B平面参数方法计算失败问题,提出一种基于P平面参数的自由返回轨道快速设计方法。首先,基于轨道半通径参数的普适性,给出了不同轨道类型的P平面参数定义,建立了以P平面参数为求解目标量的自由返回轨道求解模型。其次,给出了基于P平面参数的自由返回轨道快速设计方法,在构建的瞬时地月惯性系下,以平面双二体自由返回轨道作为初值,实现了高精度力模型下的自由返回轨道快速求解。对8种构型自由返回轨道的设计结果表明,P平面参数具有类似于B平面参数的大收敛域,且有效解决了轨道类型变化对计算的影响,可直接应用于中国后续月球探测任务轨道设计。     

基于高速慢车的航空发动机快速响应控制

针对传统航空发动机响应速度慢,难以在紧急事件中用于控制受损飞机完成起降过程的问题,采用高速慢车控制模式来提升发动机加速性能,通过增加发动机在慢车时高压压气机转速,为加速前期提供更大的燃油流量,从而缩短发动机从慢车至最大状态的加速时间。为保证慢车时高压转子转速提高的同时发动机推力和稳定裕度不变,通过修改高压压气机可调导叶控制计划来调整高压转子工作点。仿真结果显示,与原有控制相比,采用高速慢车快速响应控制模式的发动机加速上升时间从原来的2.00s缩短至1.86s,而高压压气机最小喘振裕度仅由16.01%下降至14.81%,同时慢车推力基本保持不变。     

飞行控制技术面临的挑战与发展

总结了飞行器的发展趋势,明确了飞行控制领域的前沿问题与挑战,概括了飞行控制技术的基础问题和关键技术,分析了现阶段飞行控制技术研究进展,对未来飞行控制技术的发展提出了建议与思考。     

卫星控制中心系统平台的高可用设计与实现

卫星控制中心是卫星地面测控管理系统的重要组成部分。随着信息技术的飞速发展和测控关键业务量的增长,高可用性、高可靠性及易维护日益成为卫星控制中心系统的设计目标。为满足卫星测控任务的需求,本文描述了卫星控制中心的网络系统、数据处理系统和数据库集群系统的高可用设计,并给出具体项目的成功实现。     

Evolution of the orbital elements for objects with high area-to-mass ratios in geostationary transfer orbits

A new population of uncatalogued objects in geosynchronous Earth orbits (GEO), with a mean motion of about 1 rev/day and eccentricities up to 0.6, has been identified recently. The first observations of this new type of objects were acquired in the framework of the European Space Agency’s (ESA) search for space debris in GEO and the geostationary transfer orbit (GTO) using the ESA 1-m telescope on Tenerife. Earlier studies have postulated that the perturbations due to the solar radiation pressure can lead to such large eccentricities for GEO objects with a high area-to-mass ratio (A/M). The simulations showed that the eccentricities of GEO objects with large A/M exhibit periodic variations with periods of about one year and amplitudes depending on the value of A/M. The findings of these studies could be confirmed by observations from the ESA 1-m telescope on Tenerife.     

Characterization of the cataloged Fengyun-1C fragments and their long-term effect on the LEO environment

The intentional breakup of Fengyun-1C on 11 January 2007 created the most severe orbital debris cloud in history. The altitude where the event occurred was probably the worst location for a major breakup in the low Earth orbit (LEO) region, since it was already highly populated with operational satellites and debris generated from previous breakups. The addition of so many fragments not only poses a realistic threat to operational satellites in the region, but also increases the instability (i.e., collision cascade effect) of the debris population there.     

Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.     

Cosmic ray studies at Moussala – Past,present and future

We review the main activities carried out at Moussala peak (2925 m above sea level, 42°11′N, 23°35′E) station in Bulgaria, connected with cosmic ray investigations during the last five decades. Several important results obtained at the station are reported. The detector design and corresponding methodological studies of the presently operational devices are shown as well, precisely the Cherenkov light telescope, lead free neutron monitor and muon telescope. The scientific potential of the existing complex is discussed.     

叉流管－管型换热器二维温度场的数值分析

建立并导出叉流管－管型换热器传热过程的二维数学模型及相应的差分格式。对比实验数据和性能计算结果，表明数值方法是有效可行的，据此编制的计算机程序已成功地用于组合发动机空气预冷换热器工作过程的预测。